3D Printing Guide

Resin printing is the gold standard for miniatures. MakerForge models are high-poly by default, perfect for 4k and 8k screens.

• Orientation: Tilt models 45° backwards to minimize support scarring on the face.
• Hollowing: Use 1.5mm - 2mm walls for standard 28mm minis. Don't forget drain holes!
• Supports: Use light supports for details (weapons, fingers) and medium for the base/body.

Great for terrain and larger monsters. With a 0.2mm nozzle, you can achieve near-resin quality.

• Layer Height: 0.08mm - 0.12mm for minis. 0.2mm for terrain.
• Speed: Slow down! 30-40mm/s for outer walls ensures crisp details.
• Cooling: 100% fan for PLA is crucial for overhangs.